Washing machine ardo tl85s DIY repair does not turn on start

In detail: washing machine ardo tl85s do-it-yourself repair does not include start-up from a real wizard for the site my.housecope.com.

The probable cause is a malfunction of the lid lock

We remove the side walls, disconnect the hopper drain pipes (disposable clamps!). We remove the upper protective cover of the control panel, unscrew the screws that secure the plastic top of the machine to the metal frame, and move the top of the product to the back wall and lift it from the side of the cover lock, unscrew the screws from the inside that secure the lock casing to the body.

We take out the blocking casing together with the blocking, remove the leads from it, which are dressed in plastic cambric in the figure (on the reverse side of the blocking there is a circuit for its inclusion) and close them. We turn on the washing machine, if it works, then in the absence of the original lock, we reliably close the above conclusions, isolate and assemble the washing machine.

Thus, you have excluded the electronic lock from the circuit, but the mechanical lock remains. It should be remembered that now you can not open the cover of the machine during its operation.

Message volna2m »10 Jan 2009 17:32

A gentleman is a person with whom you feel like a gentleman.
Repair of washing, dishwashers, sewing machines and boilers in Nizhny Novgorod

Message arkady "13 Jan 2009 17:10

Message volna2m »16 Jan 2009 10:23

A gentleman is a person with whom you feel like a gentleman.
Repair of washing, dishwashers, sewing machines and boilers in Nizhny Novgorod

Message arkady »07 Feb 2009 14:32

Message SKORPION »07 Feb 2009 14:50

Message bun »08 Feb 2009 16:54

Message arkady »13 Feb 2009 21:21

Video (click to play).

Message volna2m »14 Feb 2009 12:14

A gentleman is a person with whom you feel like a gentleman.
Repair of washing, dishwashers, sewing machines and boilers in Nizhny Novgorod

Message ValentinS »16 Feb 2009 00:41

Message volna2m »16 Feb 2009 16:51

A gentleman is a person with whom you feel like a gentleman.
Repair of washing, dishwashers, sewing machines and boilers in Nizhny Novgorod

Message ValentinS »17 Feb 2009 07:38

Message SKORPION »17 Feb 2009 18:21

Message ValentinS »18 Feb 2009 20:32

Message SKORPION »18 Feb 2009 20:47

Message ValentinS »18 Feb 2009 22:23

Message SKORPION »18 Feb 2009 23:52

Message ValentinS »24 Feb 2009 07:09

Message SKORPION »24 Feb 2009 17:38

Message ValentinS Feb 24, 2009 20:20

Message Vikt0r 07 Jul 2009 20:27

Message Vikt0r »08 Jul 2009 20:57

Message bun 09 Jul 2009 09:42

It is forbidden to write answers that do not carry any benefit for the questioner from the series: “bring to the service”, “contact the ASC”, “unprofitable”, etc. Answers like these will be considered a rating cheat, the answers will be deleted, and the account will be blocked.

If you undertake to help people, answer fully. Explain why, if you recommend, for example, reflashing your phone, then write how to do it. If you write that repairs are unprofitable, explain why.

Do you need to repair your Ardo washing machine? You have a choice: repair the equipment yourself or contact a service center. In the latter case, additional expenses are foreseen for the work of the wizard. Therefore, we will tell you how to find and fix a breakdown with your own hands.

Error codes will help determine the location of the problem: E00 / E01, E02, E03, F2, F4, F5, F6 / F9 / F12, F8, F13 / F14. The control board diagnoses the system in the event of a breakdown and displays a set of symbols on the display. Each of them points to a different problem. The decoding of errors can be found in the operating instructions and our article.

Serviceability of the heating element and its wiring.
Thermal sensor performance

Remove debris from the drain filter, hose, pipe.
Replace your broken pump

Replacing the motor brushes.
Repair of windings.
Installing a new module

Ardo washing machines are divided into two main categories according to the type of load:

Vertical (Ardo TLN 85 SW, T80X, TLN 106 SA).
Frontal (Ardo SE 810, FLN 126 LW, A 1033, WDO 1485 L).

The Ardo top-loading washing machine features a compact body that easily takes up the space between the bathtub and the sink. But it is not without its drawbacks.

Here's what users are complaining about:

Machines with a long service life (more than 5 years) spontaneously open the drum flaps. This leads to jamming and separation of the flaps.
The top cover of the drum is often corroded because the water is fed through the top.

Close the flaps more tightly. Clean the latch from debris, adhering powder.
Do not overload the tank with laundry.
Observe the dosage of the detergent to prevent foaming.
Wipe the drum with a dry cloth after washing to avoid corrosion.

The rest of the problems are similar to the front models. The most common ones are:

The "Ardo" washer is noisy and makes extraneous sounds.
The equipment does not drain water.
There is no water heating.
The drum does not rotate.
After switching on, there is no water intake or it flows in excess of the norm.

Let's see how to make an independent repair.

Some breakdowns can be eliminated without the help of a wizard if you follow our recommendations.

SMA buzzes, makes noise, vibrates

Have you bought your car recently? Did the unit start jumping and rattling when you first started it? Check if the shipping bolts have been removed. They lock the tank in place to prevent damage during transport.

Unfold the case with the back wall.
Remove the bolts around the perimeter.

Also make sure the equipment is level and stable on the surface. The floor must be level and firm. Twist the legs of the clipper if necessary.

The most serious failure is bearing wear. In this case, not only a rumble is heard, but also a grinding noise (with severe wear). Replacing a bearing is considered a difficult repair. How to disassemble the CM "Ardo" and install a new bearing, watch the video:

The drum is not spinning

Ardo technology uses direct drive motors. The engine has a small pulley and the tank has a large pulley. Together they are connected by a drive belt. When the motor starts, a small pulley spins and transfers torque through a belt to the tank. Therefore, in case of a similar problem, inspect the belt:

Observe safety precautions: unplug the machine from the mains before starting work.

Disconnect communications.
Remove the two top cover bolts. They are located at the back.
Unscrew the screws around the rear wall.

You will see a belt behind it. If it flew off the ground, restore its location. Put the part first on the small pulley, then, scrolling, onto the large one. If worn, broken, stretched, replace the belt.

No water intake. Overflow in the tank

You have started the program, but the water filling has not started. Clear the blockage:

Filler and hose. Substitute a container and disconnect the hose from the body. Rinse it under pressure from the tap. Behind it is a mesh filter. Remove it with pliers, rinse with water. For stubborn dirt, it can be brushed with citric acid.

Inlet valve. Remove the top panel to inspect the part. Loosen valve hose clamps, remove debris from them. For accurate diagnosis, you need a multimeter. When measuring the resistance on the coils, there should be an indicator of 2-4 kOhm. If the indicators are different, then a new valve is being installed. To do this, its contacts are disconnected, the fastening bolt is unscrewed.

The reason for the shortage or overflow of water can be a pressure switch. It is called a level (pressure) sensor. Its tube reacts to an increase in pressure in the tank during fluid intake. Then the sensor sends a signal to the module that enough is collected, and the flood stops.

Incorrect operation of the pressure switch, its breakdown leads to malfunctions in the intake system.

The part is located under the top cover against the side wall.Clean the sensor hose, connect a short tube in its place. Blow into it. If you hear clicks, the part is working properly.

The CM device provides for a drain system. At the end of the cycle, the board gives a signal to the pump to start drawing water. The liquid is drained through the pipe and goes into the sewer through the drain hose. For diagnostics:

Empty the filter. Open the door under the loading door. Unscrew the filter counterclockwise, place the container.

Dismantle the rear wall.
Tilt the body back to reveal the bottom.
Disconnect the pump wiring.

Unscrew the pump screws with a 10 head.
Loosen the clamps of the hose and the branch pipe, remove them from their place.
Clean all components.

Mechanical development becomes a frequent cause of breakage of pops. Then the impeller clings to the housing and the element needs to be replaced.

Buy a similar pump, install in reverse order. More on video:

Doesn't heat waterThe heating element or its thermistor becomes the cause of the breakdown. The heater in SM "Ardo" is located at the back. How to dismantle the back wall, we described above.

The heating element is located under the tank.

Pull the thermal sensor out of the housing.

Disconnect the terminals.

Unscrew the center nut (not completely).

Push the bolt inward.

Pry the heating element with a screwdriver.

Remove from the nest.

Connect new elements in reverse order. Pre-clean the nest from debris.

The new thermistor is simply inserted in its original place, the terminal is connected to it.It will not be possible to repair the electronic module on your own, unless you have special skills. An electronic board is an expensive part, so it is better to contact a service center.We examined the main breakdowns of the Ardo SM, now you know how to repair equipment with your own hands.If you are interested in self-repair of Ardo washing machines, it means that the machine has broken down and you would like to save money on repairs.While others convince you to call the technician, we will help you carry out the repair yourself. To make it easier for you to understand everything, we will consider the main breakdowns, fault codes and provide detailed repair instructions.FIND A MANUAL FOR YOUR WASHING MACHINE ARDO IT IS POSSIBLE AT US ON THE SITE. Is free! The instructions can be downloaded or viewed online.Service center technicians claim that all faults in ARDO brands are divided into 2 types: typical and rare.Typical. These are glitches typical for all washers, not only the Ardo brand, but also any others. For example, in every typewriter, such a misfortune can happen: water does not drain, it leaks, the drum is blocked, and so on.Rare. Such breakdowns are associated with the brand of the machine, and depend on the technologies used in the manufacture of the CM. These include a tank full of water, insufficiently heated water, and others.Attention! According to experts, in 9 out of 10 cases, Ardo washing machines with normal and vertical loading bother the owners with typical breakdowns that are not related to the peculiarities of production. This proves once again that the ARDO technique is quite reliable.A breakdown is usually reported by a number of symptoms. By carefully studying them, you can recognize the failure. Therefore, it is better to start with an overview of the most common signs of breakdowns:

Water does not drain. This can happen for a number of reasons, among which, mainly, a blockage of the drain system, consisting of a branch pipe, a drain hose and a pump (drain pump). It is extremely rare that this problem occurs due to the failure of the thermal sensor.

The water stopped heating. This is especially noticeable in high-temperature washing modes. You can understand that the water does not heat up by looking at the cold linen and unwashed stains on it. Failure of the heating element (heating element) causes a breakdown. Limescale and scale slowly but surely destroy the part, causing it to burn out. The wasted resource of the part is also not excluded.

The drum stopped spinning - it was stuck rooted to the spot. The device of Ardo washing machines is such that the drum is driven by a special belt.If the belt comes off the pulley or breaks, the tank will stop spinning. In this case, you need to fix or replace the belt.

Noise and "left" sounds - knocking, hum, rumbling. If you hear them in operation, then the reason lies in the bearings. An object that has fallen into the tank often makes noise - a button, a coin, etc.

Water leak. The fault of a dangerous breakdown is a violation in the pump or pipes. In the most severe case, you will need to replace the bearing and oil seals of the Ardo washing machine.

The program crashed. The machine does not start. All this is typical for a breakdown of the control module.

Read also: DIY glass ceramic repair

Don't panic, you can often do without a master. Perhaps, having correctly identified the breakdown and its cause, you can fix the washing machine yourself.Modern washing machines are complex devices, in the microprocessor of which breakdown codes are programmed. They appear on the display whenever a fault occurs.In the most frequent cases, the Ardo brand SM displays the following error codes: E00, E01, E02, E03, F2, F4, F5, F13, F14. Image - Washing machine ardo tl85s DIY repair does not turn on start

If your Ardo brand washing machine for some reason does not turn on or start, do not rush to call the service center. It is very likely that this problem is completely solvable, the main thing is not to panic and act carefully in accordance with the recommendations that we will give in this article. And you will always have time to spend money on a master!

What caused this behavior of the Ardo brand washing machine. Offhand, not a single master will tell you, you need to look. However, initially it will be useful to determine the range of possible malfunctions that could potentially lead to such consequences. What is this malfunction?

Problems with the power grid, machines, outlet, extension cord.
Problems with the power cord, plug.
FPS - network capacitor burned out.
The hatch blocking device is out of order.
The on / off button contacts are burnt.
The control module is broken.

The masters jokingly call the first two reasons from the specified list "childish", although for a hostess who unexpectedly faced such a malfunction, they may seem quite serious. The third, fourth and fifth reasons require minor repairs. And finally, the sixth reason is the most multifaceted.

If everything costs by replacing the burned-out triac on the control board, then this is a repair of medium complexity. And if several semiconductor parts burned out along with the tracks, then this is a difficult and expensive repair, or replacement of the board, but let's not get ahead of ourselves.

If the Ardo brand washing machine does not turn on or start, you need to start searching immediately

malfunction. Where to begin? And you need to start with the simplest reasons. The easiest way to check them is to keep the washer in place. At the first stage, it will not have to be disassembled, disconnected from communications, or moved. What should be done?

Unplug the washing machine from the outlet, insert the plug of the working appliance into this outlet and turn it on. This is the easiest way to check if the outlet is working.
If the outlet works, check in the same way the extension cord to which the Ardo washing machine is connected.

Be careful! Burnt and exposed wires, as well as damaged sockets, are a real danger. Observe safety precautions when working with electrical communications.

The Ardo washing machine may refuse to work due to a damaged power cord. For first inspect the wire and plug visually, perhaps the insulating layer is damaged somewhere or there are traces of melting. If this is found, the wire cannot be exploited.
If you could not detect anything visually, check the wire for breakdown with a multimeter. Set the toggle switch of the instrument to test resistance (minimum value). Touch one probe of the appliance to the right prong of the mains plug of the washing machine, and the other probe to the left. If a value in the region of 2 Ohm lights up on the instrument panel - the mains wire and plug are in good order, if the value is 9-12 Ohm or more - the wire is faulty, there is a complete or partial breakage.

If you find problems with the network wire, you do not need to try to repair it yourself, open the insulation, change individual wires of the wire. Change the entire wire together with the plug, it will be more accurate and reliable, and most importantly, safer for you and your washing machine.

The Ardo brand washing machine does not turn on and does not start, not only because of the network wire and problems with electrical communications at home, such problems can arise due to the FPS, the so-called noise filter or network capacitor. This semiconductor element is installed in the washing machine in order to suppress significant interference that is present in the household power supply. And thus protect the sensitive electronics that the washing machine is stuffed with.

The noise filter is located at the end of the power cord inside the washer. To get it, you will have to remove the top cover of the Ardo washing machine. We unscrew the two mounting bolts, pull the cover towards ourselves and remove it. Under the cover, in the place where the mains wire fits, you will see a capacitor. We disconnect the wires from it and take out the part from the washing machine.

Attention! When making the above manipulations, make sure that the washing machine is de-energized.

We put the multimeter at the minimum resistance value and call the capacitor. Calling the part, you will see that the value starts to grow rather quickly until the display shows a large number or -1. This will mean that the capacitor is working. If you started checking, and the number 1 or 0 immediately appeared on the display, the capacitor needs to be changed.

We buy a new capacitor, put it in the place of the old one, connect the wires, put the cover back in place, make the connection and see how the washing machine works, how it turns on and starts. If everything is correct, the repair was successful!

The reason that the Ardo brand washing machine does not turn on and does not start may be the on / off button. Most often, such a malfunction occurs with old washing machines that have already worked for 10-12 years. The probable reasons for such a breakdown can be:

wear of contacts, in this case, before finally breaking, the button will start to work once, or even twice;
contact with the button contacts of water, liquid detergent and other chemicals;
oxidation of contacts due to operation in high humidity conditions.

What do we need to do? First, remove the control panel of the washing machine in order to get to the desired button. Remove the top cover of the washing machine, unscrew all fasteners holding the front panel and remove it. Next, we need to inspect the button contacts and ring them with a multimeter. In this case, we proceed with the device in exactly the same way as described above. When the values 1 or 0 appear on the board, we can assume that the button is burned out and needs to be changed.

For your information! On some models of Ardo washing machines, the control panel is attached to plastic latches; to remove it, you need to carefully pry them off without breaking anything.

We remove the old button, in some cases you will have to use a soldering iron, put a new, original one in its place. We put the control panel in place, connect and check the "home assistant". If the washing machine turns on and starts up perfectly, then everything is fine, but if during the check you found that the button is working, then everything is worse than it could be - the control module is out of order.

Failure of the washing machine control module, this is a rather serious malfunction that requires the intervention of a good specialist. It doesn't matter whether you are going to repair the microcircuit or change it, all this should be done by the master. If, after checking all the above details, you are convinced that this is exactly the control board, prepare the money and call the master. Self-repair of the control microcircuit is possible only as a last resort if you have the skills to work with electronics.

The likelihood of success in this case is small, but in this case we will not focus on this issue special attention. If you are interested in the question of the possibility of independently repairing the control board, read the publication on the topic Is it worth doing the repair of electronic modules with your own hands? Our advice on this matter is unequivocal - contact a good service center.

10 reader commentsI had such a situation: when the machine was turned on, the lamp on the front panel lit up, but nothing happened, neither water intake, nor drum rotation, in any mode. I accidentally pulled the plug out of the socket, then plugged it in again and everything worked - apparently, the circuit was reset.Read the recommendations for repairing the Ardo washing machine from the master!The manufacturer (translated from Italian home appliances) is Antonio Merloni.Front loading standard - FL models.
Drying - WD.

30% - blockage of the drain path, wear and damage to the pump:

We open the loading door, on the sticker we determine the model of the machine. Image - Washing machine ardo tl85s DIY repair does not turn on start

Unscrewing the drain filter from the front at the bottom, clean it.

We change the pump, which is located at the bottom right on the back side.

We loosen the clamp on the drain pump branch pipe.

We check the pump, clean it - in case of a malfunction, we change it.

Over time, mechanical wear appears on the shaft. The impeller dangles and does not pump out water well.

20% - malfunction of the electronic control board:

MINISEL board: Ardo models FL1000, FL1202, FLS81S, A800XEL, AE810, AE800X, SE810, FLS81S, AED1000X, TL1000EX, TL1010E ANNA610, ANNA 600X, A410, A610, A500, A1000.

We look at the power supply and the level of constant voltages (5 and 12 V) at its outputs. If there are no voltages at the IP output, check the corresponding elements - a power switch, a power filter, a power transformer T1, a rectifier (D11-D14), a U1 microcircuit.

Module DMPU: Models A800, A804, A810, A814, WD800X, S1000X, T80, T800, TL800X, TL804, etc.

Malfunctions in the DMPU module

breakage of resistances R51 (A, B);
stabilizer U3;
Zener diode D24 (short circuit);
open varistor VDR5.

relay K1, K2;
Rsimistor TR2.
Diodes D1-D6, D9-10, D15, D23.

A thing of the past module DMPA:

They are used in typewriters with an asychronous drive motor and a mechanical controller.

Models A1000PL, A1000XCZ, A1000XPL, WD1000PL, TL1000X, etc.

The wear of the heating element increases with “hard” water.

Overgrowing with scale (scab), it gives off heat poorly and burns out.

You need to pull out the gum and not the heating element. Since pulling out the heating element, you can wedge the gum.?

This is important to avoid further leakage under the seal.

10% - wear of brushes of the collector motor, loosening of contacts, breakage of the drive belt

Remove the belt, unscrew the screws and remove the engine. The motor has two brushes, each attached with two screws. We unscrew the screws and remove the brushes.

Inspect the board motor power supply terminal and ground wire.

Very often, the contacts are oxidized from moisture and the machine gives an error because of this.

Each brush is installed in a brush holder. It can be taken apart into two halves. Pay attention to how much the brush protrudes.

This size should be at least 1 cm. The best option is 1.5 cm. After that, we assemble everything and put it back in place.

10% - extraneous noise (bearings, shock absorbers, foreign object)

Having jammed the pulley, unscrew the upper shaft clamping nut counterclockwise.

If the oil seal is not filled with a specialized grease and the cross bushing is not lubricated with it during assembly, the oil seal will wear out very quickly, no matter what quality it is, this has been proven in practice.

It is not worth saving and improvising with lithol, grease and other lubricants, get better specialized lubricants that are used to lubricate oil seals.

Standard sizes of Ardo bearings and seals:

This applies to modern technology - since 2000 (models AE800X, AED1000X, TL1OOOEX).

Thanks to it, you can diagnose (control module DMPU):

Close the hatch (without linen). Set the program selection to 30 ° C until it clicks. The temperature regulator to 0 ° C. Turn on. The drum rotates at 250 rpm. To check the buttons half load, additional rinse and others, press them. The spin speed increases from 250 to the maximum, provided for this model. In the absence of additional functions, press the spin button.

Indicators will blink when a malfunction is detected.

E00 | E01

E02

E03

F6 | F9 | F12

F13 | F14

Breakdowns are rare, usually associated with improper operation. Italian technology is distinguished by its high manufacturability and versatility.

How to carry out a service test equipped with the MINI-SEL board:

Control panels look different

The steps to enter the check mode are shown in the figures.

- move the program selector knob to the 6 o'clock position
- press the button 4 - ENERGY WASH and, while holding it, press the POWER button.
After that, the CM should go into test mode.

With temperature control knob:

- turn the program selector knob to the 6 o'clock position
- move the temperature selection knob to the 9 o'clock position
- press and hold the ENERGY button (for at least 6 s), at the same time turn on the power supply of the CM with the POWER button.

After that, the CM should go into test mode.

Turning the selection knob, we check the devices:

Knob in position 1 (autotest) - NTC temperature sensor (sensor circuit - for open or short circuit), pressostat, display (if any), door lock and main function buttons on the control panel

2. First, the cold water inlet valve is opened until a signal is issued from the water pressure sensor. The filling of water takes place through the compartment of the dispenser for the PREVIEW.

3. First, the heating element turns on and the water in the tank heats up to 60 ° C. Then the CM drum starts to rotate in a cyclic mode at a speed of 45 rpm (as in a washing mode).

4. The drain pump (pump) turns on. At the same time, the drum starts to rotate as during spinning.

5. Within 10 s, the hot water filling valve is turned on (if this CM model has it). At the same time, the CM drum starts to rotate.

6. The fan and heating element of drying are included (for models with drying)

The test mode is exited by turning off the power with the POWER button.

The malfunction is manifested by a lack of response to control. You are pressing the Start button and the indicator lamps are off. Or they are on, but the machine does not wash. Ardo may not turn on for various reasons. Let's consider the most common ones.

there is no voltage in the network;
break in the network wire;
malfunction of the hatch lock;
broken start button;
breakage of wires in the power circuit;
the control module is out of order;
the belt broke.

Check the presence of voltage in the network. For this, a voltmeter, an indicator screwdriver or another electrical device (lamp, hair dryer) may be suitable.
The serviceability of the plug and socket is checked by external inspection or an ohmmeter. The malfunction is eliminated by replacing the faulty piece of the network wire. If a malfunction of the outlet is established, then it is necessary to restore it or switch to another one that is known to be working properly.
In another case, the signal lamp for the presence of the network lights up, but the machine does not turn on, the hatch is not blocked. The serviceability of the hatch lock is checked by external inspection of the lock or with an ohmmeter. To do this, it is necessary to remove the hatch cover, check that the blocking is working properly. Shorting the mains wires leads to the start of the machine. The defective lock is replaced with a similar one. If the lock is working properly, the problem of switching on should be looked for in the control unit: the control signal is not received.
The "Start" button is checked with an ohmmeter in two positions of the button in the de-energized state of the machine. When depressed, a pair of button contacts should indicate zero resistance. The faulty button is replaced with a good one.
The serviceability of the power supply circuit wires is checked with an ohmmeter and external inspection. When inspecting, pay attention to the closed state of all connectors, the absence of traces of burning.
Check the status of the control module. Replace defective control box immediately.

The machine may not work due to a broken belt.

Dismantle the back cover and belt, wiggle the pulley, and if there is no play, then the bearings are in good condition. Buy a belt from a company that sells spare parts, the price is low - call. Reassemble in reverse order. Be sure to tighten the belt!

The Ardo unit may not respond to the power button for many reasons, the main reasons are described above. If your Ardo washing machine does not turn on, do not try to disassemble or repair it yourself. Your actions will only make the problem worse.

Contact Moscowmaster24. Leave a request on the website or type +7-495-766-12-13... Specify the following information:

washing machine model Ardo;
approximate breakage time;
other "symptoms" of breakage, if any;
contact details: mobile number, name, address.

Our specialist will go to the call immediately after the manager receives the application. On the spot, the foreman will diagnose the machine (it's free!), Establish the exact cause of the problem and fix it. The repair usually takes no more than 2-4 hours. In rare cases, the unit must be taken to a service center and repaired there (if you need to change parts or completely disassemble the case).

We make your Ardo washing machine work. Call us!

Elimination options:
1. It is necessary to check the presence of water in the water supply. It is trite, but very often the reason for the appearance of an imaginary malfunction is such funny things.

2. The inlet hose is squashed or clogged. We check visually for the absence of compression. We unscrew the hose from the washing machine, turn on the tap and see if the water will pass through? Of course, care must be taken to ensure that the water does not drain onto the floor. If the water does not come out, we find and remove the blockage. The hose with a leakage valve after the protection has been triggered will have to be replaced with a new one.

3. The filler mesh on the back of the washing machine is cleaned. The mesh is quite fine and often clogged with rust or other particles from the tap water. The filter can be easily removed with pliers and cleaned thoroughly.

4. It is necessary to make sure that the filling valve is in good working order. It is located just behind the filter. The valve becomes accessible after removing the top cover of the washing machine. Perhaps the wires of its power have come off or frayed. To check the functionality, the valve itself can be removed and connected to the voltage indicated on its body. Should open. If it does not work, you will have to change the valve to a new one.

5. The problem may be related to a faulty water level sensor. Or, in another way, the pressure switch. You can also find it under the top cover. It is removed quite easily. It is held in place by screws or latches on the body of the washing machine. We check the integrity of the wires and their connection to the sensor. A tube comes up to the pressure switch from below. It may be clogged. The simplest test for the performance of the sensor after removing it is to blow into its tube. If you hear a click, the pressure switch is most likely working properly. Otherwise, you will have to change to a new one.It is important not to mix up the wires when installing a new one.

Common causes and solutions:
1. Again, about the banal - you need to make sure that the sewer pipe is not clogged. Maybe the car just has nowhere to drain the water. Of course, this is possible with machines with a permanently connected drain. We also check the drain hose of the washing machine. It should not be kinked or twisted. In principle, you can disconnect the hose from the sewer and check if water comes out of it when draining? If it does, we clean the sewer system. If not, check the hose for clogging. Problem still exists? We look further.

2. The drain filter is clogged. Simple, but the most common reason for the lack of a drain. The filter is located at the bottom of the washing machine under the door or decorative panel. It is a screw plug screwed into the machine body using a standard right-hand thread. Accordingly, the filter is unscrewed counterclockwise. Do not forget to place a tray under the washing machine to collect the flowing water. After removal, the filter is cleaned of impurities. You will need to remove the excess in the place where the filter was installed. Next, reverse the process and check the drain. Most often it helps.

3. Blocked or faulty drain pump. A common problem for Ardo washing machines is the blocking of the pump due to foreign objects entering it. Various coins, buttons and other items left in the pockets of the washable clothes, getting inside the drain pump, prevent it from performing its functions. A symptom of a blockage of a working pump - at the moment the drain is turned on, the pump hums, tries to expel water, but cannot. Another option is that the pump has become completely unusable. In any case, he will have to be removed. In Ardo washing machines, it is very easy to access the drain pump from the bottom of the machine. They have no bottom or are covered with an easily removable plastic strip. It is enough to lay the car on one side and the access is open. Before removing, you can check the pump performance with a multimeter. Further, the clamp of the rubber pipe is loosened and it is separated from the pump. The same procedure is for the drain hose. Power wires are disconnected. It remains to unscrew the screws that hold the pump and remove it. A serviceable pump is disassembled. And foreign objects are removed from it. The defective one is replaced with a new one.

4. The lack of drainage can be caused by incorrect operation of the pressure switch. It simply may not send a signal to the control module to drain. We have already discussed what needs to be done with the water level sensor above.

2. A rare, but possible breakdown is a malfunction of the temperature sensor. It is checked by measuring the resistance at room temperature and when heated with hot water. A non-working sensor is simply replaced.

3. It is necessary to make sure that there is no "sticking" of the contact group of the heating element relay on the control module.

Video (click to play).