Do-it-yourself beko washing machine does not turn on

In detail: do-it-yourself beko washing machine repair is not included from a real master for the site my.housecope.com.

The washing machine is considered one of the most important types of equipment in every home. CMAs from the Beko company, produced in various types at reasonable prices, are popular. Like other equipment, cars from this company are not considered eternal and can also break down at the wrong time.

The masters claim that the VEKO machines are equipped with not very high-quality parts, which include a management board, a temperature sensor, and a relay. The repair of such machines does not always justify itself, and the consumer is forced to purchase a new washing machine. But sometimes the problems are not too serious, it is quite possible to eliminate them on our own. So it is worthwhile to deal with typical failures and understand how the repair of Beko washing machines is carried out.

Professional repairmen of washing machines can, after observing the working equipment, name a unit or element that has failed or will soon break down and will require repair. Everything is simple - problems have begun with a washing machine, you immediately need to call a specialist and a workshop so that he can identify the cause and, with a successful combination of circumstances, carry out repairs on the spot. It seems that everything is easy and simple, and there is no headache. Yes, and such an act in some situations is fully justified.

But there is one caveat - a call to the master's house will cost you a tidy sum. It often happens that paying for repair services is more expensive than purchasing a new automatic washing machine. It is a shame to pay money in this case, especially when there is no opportunity to quickly make a new purchase. But there is one way out - to carry out the repair with your own hands. True, you will have to correctly determine the failure, and the main signs of breakdowns will help in this:

there is no water heating, or it heats up very much, violating the set temperature regime;
water enters the tank for a long time, or does not drain at all;
the door does not close tightly, which does not allow starting the washing process;
after the process, the waste water does not go into the sewer, the machine hums strongly;
when the drum rotates, a strong grinding, clanging and other extraneous noises are heard;
not a single program starts, because after switching on, all the lights on the panel blink. The second option - the program can be exposed, but not activated;
the washing machine from the start button does not turn on;
the display shows an error code.

Video (click to play).

If you notice that the washing process takes place in cold water, violating the set program, you can suspect a breakdown of the heating element or the control board. A similar conclusion is reached when water overheats, practically reaching its boiling point. Most likely, the whole problem is in the board, but the heating element also needs to be checked.

After starting the program, water should begin to flow into the tub for washing, and the intensity of this process depends on the set program. But when you do not visually observe the water in the tank, and the drum rotates with dry things, or after a while the machine simply “freezes”, then you should look for one of the following reasons:

there is no water in the water supply;
clogging of the filter located at the base of the intake hose;
the water intake valve has failed;
breakdown of the control unit.

The BEKO machine is designed in such a way that it will never start washing until the door is closed tightly and a special sensor-blocker sends the required signal to the control board.If the hatch does not close at all, or it seems to be closed, but the wash has not started, it is necessary to inspect the blockage. It may have broken down and cannot hold the door. The second problem is the sensor itself. If it's all about the latch, try pushing lightly on the hatch and try to activate the wash program.

When the washing process is completed, the machine must drain the dirty water and draw in fresh water in order to rinse. This process is accompanied by a hum produced by the drain pump. The water is drained out quickly enough, then the machine takes in a new amount of liquid. But if some time has passed, and the washing machine has not drained the waste water and "hangs", or the pump hums, but the water does not come off, then problems should be looked for in:

pump for draining water;
a board responsible for managing processes;
a blockage in the drain hose or sewer pipe.

When the washing machine emits a characteristic clang, rattle and knock during operation, it is quite possible that the bearings are out of order, or a foreign object has got into the tank, getting stuck between it and the drum. In this case, the machine should be turned off immediately and all measures should be taken to fix the problem.

The SMA may not turn on at all, or it blinks with all the lights, and turning it on again does not give a positive result. In this case, the problems may be related to:

breakage of the starting button of the machine;
failure of the management block;
a break in the power cord.

The best option is when the washing machine not only refuses to work, but gives out a certain error code. With its help, you can immediately understand what the problem is.

Let's figure out how to repair Beko washing machines on our own.

You should be aware that after washing on a machine, the waste water is not clean and transparent. To prevent various small debris and dirt from clogging the pump, a special filter is installed in front of it, which in most cases becomes clogged. The main task is to find this element, which is usually located at the bottom of the machine, under a small hatch or panel.

Further actions should take place in the following sequence:

To cope with such a failure, you will have to partially disassemble the washing machine again. But first, it should be noted that in all machines, the thermoelectric heater is among the weakest units. People call it a simple word - heating element. The mineral components in the pipes under the influence of hot water begin to crystallize and accumulate on the heater with ordinary scale. Plaque does not allow heat to pass to the water, so the heating element burns out. But if the water in the pipes is soft, and scale does not appear, or you use special means, then the heating element is still able to burn out, since it has its own working resource.

Read also: DIY jack repair

It might seem that if there are certain problems with the machine, then you should immediately call the master at home, and he will deal with the causes of breakdown and discomfort in working with the device. All this is easy, fast and without unnecessary hassle, therefore, in most cases, such a course of actions by the owner of a broken washing machine is quite appropriate and justified.

But nothing happens without a fly in the ointment in a barrel of honey: calling a master at home costs a lot of money, which sometimes is simply not in stock or in large quantities.

It often happens that repairing a VEKO washing machine is more expensive than a brand new machine of the same model. It's a shame to pay so much money to fix an old car, especially if you can't afford to buy a new car yet.

The only sure and not so expensive way out is to fix the breakdown with your own hands. But for a well-performed repair, you first need to correctly diagnose, i.e. find the true cause of the breakdown, and only after that start something to "treat".

The following "symptoms" of a malfunction of the VEKO machines will help you find a solution to the problem.

The water is not heated, and washing is carried out in cold water, or, on the contrary, washing takes place in very hot water, which does not correspond to the temperature at which it should have been heated.
Water is drawn into the washing tub for a very long time, or the water access is completely blocked and does not work.
It is impossible to close the hatch to the end, which is why the washing cannot begin simply.
At the end of the wash, the water simply does not drain, and this process can be accompanied by a fairly strong hum.
The drum of the VECO washing device, when rotating, emits a loud rattle, clank and other extraneous sounds.
Can't start any programs st
irki, because after turning on the machine immediately starts blinking with all the light indicators. It also happens that the program is exposed, but simply does not start.
The machine does not respond to turning on the button, although the plug is plugged into the outlet and there are no faults with the electricity supply.
VEKO machines with a display give out an error code and simply "refuse" to work.

We advise you to pay attention! There can be many more malfunction symptoms, but the most common malfunctions are described above.

As we have already noted above, malfunctions of washing units can easily give out this with their external symptoms with improper operation or complete failure. But how can these breakdowns be correctly associated with certain breakdowns? Here you will already need some knowledge and advice from leading experts, which we will gladly present in this article.

If you notice that wash is done in cold water instead of the set 40

or 60 degrees - this speaks of breakdown of a water heating element (heating element), or control boards.

You can come to this conclusion if you set the washing temperature at 30 degrees Celsius, and the machine persistently brings it to a boil, thereby mercilessly spoiling your delicate fabrics. In this case, a case with a board malfunction is more likely than a heating element, but just in case, check both.

When starting a program, the machine should start filling its tank with water. All this will happen with different intensities, which directly depends on the washing mode you have chosen. In order to take a look at the process of filling with water, look through the window of the tank. But if you notice that after twenty or thirty minutes, the machine may freeze and stop the execution of the program, giving some kind of error code. This development of events is characterized by four different reasons:

The lack of water in the water supply system is easy to check if you just go into the bathroom and try to turn on the tap.
Clogged water filter, which is located at the base of the inlet hose (if you have one, of course).
Breakage of the filler valve.
Control unit element malfunction.

When the appearance problems with the sunroof locking device you need to gently press down on this hatch with your knee and turn on the desired washing program again, because there is a possibility that the fixing hook simply does not reach the end of the desired part and the fixation does not have time to take place.

After the washing program is completed, the washing device should itself begin to rinse off the soapy water and pour fresh water for rinsing. This process is usually accompanied by the hum of the drain pump.

Draining takes place quite quickly, after which the machine again begins to collect clean and fresh water. If the machine cannot drain the water in any way, and then it just stops and freezes, silt

and she tries to drain the water, the pump begins to hum more, but the drain does not start, then the problem is as follows:

In the pump.
In blockages in the sewage system or in the drain hose.
In the management board.

If the machine makes a lot of noise, and the drum rotates with a terrible grinding, clanking and knocking, then perhaps in the VEKO washing machine bearings broke or a standard body of foreign origin made of metal got into the tank, got stuck between the walls and the wall began to wedge. This kind of breakdown must be immediately eliminated by first turning off the machine.

Another machine can completely not turn on completely or light indicators will start to "blink", and if this is repeated, over and over again, and rebooting does not help, then this is a sign that it can at the moment:

Break the on / off button of your washing device.

Break the power supply.

Break the power cord.

In theory, all automatic machines of the VEKO company can be repaired and no matter what their load is and whether they have a control panel.But in practice, other problems may appear that you are unlikely to be able to deal with, or the repair will be too expensive, or there are no necessary spare parts. In any case, if we have already found a breakdown and want to make it on our own, and we should not take into account all the factors, because of which later he realizes that he only lost money and time wasted. As the saying goes, "the miser pays twice."

If the bearing of a washing machine is being replaced, it may take an experienced craftsman several hours, so we advise you to time the time and compare how much the craftsman did and how much you could.Experts tirelessly recommend doing only minor repairs, which are associated with the replacement of elements, or with the removal of blockages. The rest should be left for the experienced hands of the master, because if you spoil something yourself, it will come out even more expensive for you. In workshops, after repair, they give a small guarantee. So, what can be eliminated in the eyelid machine with your own hands?

Image - Beko washing machine do-it-yourself repair does not turn on

Clean the drain filter by removing dirt, debris, etc. from there, which causes inconvenience in the operation of the machine.

Replace the drain pump, but only when you are sure that the old pump is already completely out of order.

Change the intake valve. To get started, first make sure that the problem is not with the board at all.

Replace heating element.

In VEKO TEN washing machines, it often deteriorates, especially if these are still domestic models with a load of six kilograms. It is not difficult to make a replacement with your own hands, because the main thing is that all actions are carried out according to the recommendations of specialists.

The heating element in VEKO machines is located in the back of the tank, so first remove the rear panel, having previously unscrewed a few bolts.
After removing the wall, we will see a pulley (a decent-sized round wheel), just below which is the heating element.
We take out the desired key and unscrew the fasteners, disconnecting the wires from the contacts.
We make an effort, but still carefully pull the heating element out of the groove.
We buy the same replacement part.
We insert the heating element and do not forget to fasten it.
We connect the wires back, fasten the back wall back and check the result of our painstaking work.

It is often expensive to invite a specialist, so do it only, but in the case when you yourself did not succeed or the breakdown is very serious.In all other cases, you can save money and fix everything with your own hands.

Many consumers note the reliability of washing machines that were manufactured 10-15 years ago. But even for such machines, the working resource is not infinite and they finally break down. Repair of washing machines Beko, Indesit, Ariston and other brands is far from always justified and you have to buy a new machine.

But in some cases, the problem is not so serious, it can be eliminated with your own hands, thereby prolonging the life of your beloved "home helper". That is why we will talk in this article about typical breakdowns and repair of Beko washing machines.

Experienced specialists in the repair of washing machines are able, by looking at the operation of the equipment, to determine which unit or element is broken or is about to break and needs to be repaired. It would seem that if there are problems with your machine, call such a specialist from the service center, and he will deal with the cause of the breakdown, and if you are lucky, he will fix it on the spot. Everything is quick, easy and without unnecessary headaches, and most importantly, in some cases such an act is quite justified.

But there is one "but", the call of the master and his repair services cost money, and a lot. It often happens that repair services are more expensive than the real cost of a Beko automatic washing machine and other brands of machines. It's a shame to give that kind of money for old junk, especially if there is no way to quickly buy a new typewriter. There is only one way out - to try to fix the breakdown with your own hands. But for this you need to correctly identify the breakdown, which will help the "symptoms" of malfunctions of Beko washing machines.

The water is not heated, and washing takes place in cold water, or, on the contrary, the water heats up very strongly, not in accordance with the temperature set by the user.
Water is poured into the tank for a very long time or not at all.
The hatch does not close completely and therefore the wash does not start.
After the end of the wash, the water does not drain and this is accompanied (or not accompanied) by a strong hum.
The drum of the Beko washing machine rotates with a strong grinding, clanking and other extraneous sounds.
It is impossible to start any washing program, because the machine blinks with all the lights after switching on, or the program is set, but does not start.
The machine does not turn on from the button, although the power cord is plugged into the outlet.
Beko's machine, which has a display, issues an error code and "refuses" to work.

Note! There may be more symptoms of malfunctions, but most often users have to deal with the above.

As we have already noted above, malfunctions of washing machines give themselves out as external "symptoms" of improper operation or even failure. But the problem is how to relate these symptoms to a specific breakdown? This is where some knowledge and expert advice will be required, let's summarize them in a thesis.

If you see that the wash takes place in cold water, even though according to the program the water should be warm or hot - this may indicate a breakdown of the heating element or control board. The same conclusions can be drawn in the event that the water is constantly overheating, that is, the user sets the temperature to 30 0 С, and the system brings it almost to a boil. In the event of overheating of the water, the probability of a malfunction of the control board is even greater than a malfunction of the heating element, but both elements must be checked.

When starting the wash program, the machine should start pouring water into the tub. This happens with varying intensity, depending on the program selected by the user. To see the process of filling with water, it is enough to look through the hatch window. But if you see that 20-30, or even 40 minutes pass, the drum rotates slowly, but water does not flow into the tank, or even time passes and the machine freezes, stopping the execution of the program and giving out a certain error code. There may be four reasons for this:

there is no water in the water supply system - this fact is easy to check by opening any tap;
the water filter located at the base of the inlet hose (if any) is clogged, therefore water does not flow into the machine;
the filler valve has broken;
defective control unit element.

The Beko automatic washing machine is designed in such a way that it will not start the washing program until the hatch is closed to the end and the blocking device sensor sends a corresponding signal to the control board. If the hatch does not close or seems to be closed, but the washing program is still not activated, then either the locking device has broken and does not hold the hatch, because of this, the sensor cannot be triggered, or the sensor itself has broken.

For your information! If there is a problem with the door locking device, try to gently press down on this door with your knee and restart the wash program, perhaps the locking hook simply does not fully enter the counterpart and does not lock.

After the end of the washing program, the washing machine should drain the soapy water and pour fresh water for rinsing. This process is accompanied by the hum of the drain pump. The water is drained out rather quickly, after which the machine starts to draw clean water. If the machine, after a fairly long time, cannot drain the water, and then freezes, or it tries to drain the water, the pump hums, but it does not drain, the problem is:

in the pump;
in the control board;
a blockage in the drain hose or drain.

If the machine is working very noisy, the drum rotates with a terrible clang, rattle and bang, it is very possible that the bearings are broken. or just a foreign metal object got into the tank, got stuck between its wall and the drum wall and wedges. Such a breakdown requires an immediate shutdown of the machine and taking measures to eliminate the problem.

Also, the machine may not turn on at all, or after turning it on, it starts blinking with all the lights, and this is repeated from time to time and the repeated turning on / off of the machine does nothing. In this case, it can:

break the on / off button of the washing machine;
break the control unit;
break the power cable.

It is best if the Beko washing machine with a display does not just freeze, but generates a system error with a specific code. The manufacturer has provided error codes so that the user can identify the breakdown without contacting a specialist. Description and interpretation of these codes are presented in the table below.

In theory, all Beko automatic washing machines can be repaired, no matter how many kg their drums are loaded, how old they are and whether they have displays or control panels. But in practice, problems often arise, either the repair cannot be done by hand, or it is not advisable due to the high cost, or there are no suitable spare parts available. In any case, if you find a breakdown and undertake an independent repair, you need to take these factors into account in order not to end up losing money, losing time and money.

Important! For example, replacing the bearings of a washing machine sometimes takes hours from a specialist, calculate how long it will take you, if at all you can make the replacement correctly.

Experts strongly recommend undertaking only the simplest repairs, which, for example, are associated with either the replacement of units or the elimination of blockages. It is better to leave the rest to the masters, because there is a risk of spoiling something, and this, again, will result in unnecessary expenses. So, which of the typical breakdowns can you fix yourself?

Clean the drain filter to remove any debris and dirt that may interfere with the normal operation of the machine.
Replace the drain pump, but only if you are convinced that the old one is out of order.
Check and replace the inlet valve. To do this, you will also have to make sure that the problem is not with the control board.
Replace the heating element.

Teng breaks down on Beko's washing machines quite often, especially for some reason on domestically produced models with a load of 6 kg. Replacing it yourself is not difficult, the main thing is to perform the following actions in accordance with the recommendations of specialists.

Teng in Veko washing machines is located in the back of the tank, which means the first thing we do is remove the back wall by unscrewing a few bolts.
Removing the wall, we see a large round wheel - this is a pulley, just below two large contacts sticking out of the tank - this is a ten.
We take a suitable key and unscrew the fastening element holding the heating element, disconnect the wires from the contacts.
Carefully, but with effort, we pull out the heating element from the groove.
We purchase the same heating element and continue working.
Carefully insert the new heating element into the groove and screw it on.
We connect the wires to the contacts, put the back wall of the machine in place and check the operation of the new element.

Summing up, we note that Beko's washing machines, in general, are quite reliable, nevertheless, they, like other devices, break down. To invite a specialist is an overhead, so this should be done only in the case when the breakdown is complex, in all the rest you can try to save money by doing repairs yourself.

Video (click to play).