Washing machine kandy malfunction diy repair samsung

In detail: kandy washing machine malfunctions do-it-yourself samsung repair from a real master for the site my.housecope.com.

Owners of home appliances of a well-known South Korean brand will be interested in how a Samsung washing machine is repaired with their own hands.

Unfortunately, sometimes it is necessary to eliminate breakdowns and leaks of washing machines, even in an expensive price segment, and knowledge of error codes and related malfunctions may also be required.

First, you should familiarize yourself a little with the main features of these machines. First, it is stylish design.

Secondly, it is the original design of the drum. Modern modifications of Samsung washing machines are equipped with a fundamentally new technical solution - Drum Diamond Drum .

It belongs to an innovative type of honeycomb drums with a surface covered with many convex pyramids and small water holes, into which the fabric is not drawn.

Thanks to this design, a gentle wash cycle is provided. These drums can be very spacious - with a load of up to 12 kg of laundry, depending on the model of the machine.

Thirdly, worthy of attention heaters with double ceramic coatingnot covered with limescale, and inverter motorattached directly to the drum in some modifications.

Also interesting are the functions Fuzzy Logic and Smart Check responsible for the correct calculation of the washing mode depending on the amount of loaded laundry, as well as for diagnosing various machine malfunctions.

The number of wash programs depends on the model of the washing machine. Even the simplest modifications are equipped with all the necessary set of programs, and the new models have a washing mode called ECO Bubble - with the help of air bubbles, laundry is easier to wash even in cold water.

Video (click to play).

If the machine is marked with Wf, it means that this model is front-loaded, and if its name contains the abbreviation WD, it means that the machine is equipped with a built-in dryer.

But Samsung brand machines also have one small drawback - their instability to voltage drops in the network, which is important in our Russian reality.

When the voltage becomes either too high or low, then a control system called Volt Control simply turns off the washing mode to resume it immediately after the mains voltage has stabilized. This is not always convenient, so it is better to connect the washing machine through a voltage regulator.

After a short acquaintance with the parameters of this brand, let's move on to considering the main breakdowns.

To understand the malfunction that has arisen, you need to consider the most common of them and the reasons for their occurrence.

Here is a list of common problems:

Further, the methods of repairing them with your own hands will be considered, because it is not always possible to call the master. And for this you need to have a set of necessary tools.

Before starting repairs, you need to make sure that all the tools from this list are available:

flat and Phillips screwdrivers or screwdriver;
set of wrenches;
pliers, pliers, wire cutters;
tweezers - elongated and curved;
powerful flashlight;
long-handled mirror;
soldering iron;
gas-burner;
small hammer;
knife.

In addition to the listed tools, you may need a magnet to pull out small metal objects inside the machine, a long metal ruler to align the drum, a multimeter or voltage indicator.

But that's not all.In addition to the required set of instruments, the following building materials will need to be purchased for repairs:

sealant;
Super glue;
insulating resin;
soldering materials - rosin, flux, etc .;
wires;
clamps;
current fuses;
rust remover;
electrical tape and scotch tape.

Sometimes a multimeter is not needed, it is enough to turn on the machine and select a mode with a high water temperature. From the operation of an apartment electricity meter, it is easy to understand whether the heating element is receiving power.

If you are a beginner, then you can advise using a camera to shoot a video or to photograph a workflow, so as not to confuse the sequence of actions and then assemble the machine correctly.

There are several important rules to remember that must be followed before starting repair work:

it is necessary to drain all the water from the machine;
before disassembly, be sure to (!) disconnect the device from the power supply;
choose a bright and spacious enough place for renovation.

If the unit cannot be moved to a convenient location, then ensure maximum illumination of the workplace.

The first step is to remove the top panel of the washing machine.

The second step is to take out the container for powders, this is not difficult to do. Next, you need to remove the cuff from the hatch. Caution is needed here. Use a screwdriver to pry the retaining clip, remove it, and then remove the O-ring. This should be done carefully, trying not to tear the soft rubber.

It was the turn of the control panel. In order to remove it, you need to unscrew two screws on the front of the panel and one on the right.

Next, you can proceed to dismantle the lower front panel. Pulling the latch lever, we separate the basement part of the facade - access to the drain filter and the hose for the emergency filter is open. The front panel can now be removed by unscrewing the eight fixing screws. The heating element and the drain pump open.

If during the repair process it is necessary to remove the tank and drum, then we advise you not to do this alone. Be sure to involve an assistant in this matter. Before removing the tank, you need to de-energize the heating element, disconnect all pipes, as well as the electrical wiring from the motor.

To do this, put the machine on its side, then remove the 4 screws on the bottom cover. The engine opens with a counterweight secured by shock absorbers. Disconnect the wiring from the connectors. It is important to remember what is being attached to what, therefore, before disassembling, it is advisable to photograph everything, in order to repeat everything exactly as in the picture.

But it remains to disconnect the drive belt from the engine. To do this, simply remove the belt from the pulley. Remember to put the drive belt on the small drive pulley first, then slide it over the large driven pulley and align to the center of the pulley when putting on the belt.

We present to you a diagram of the device, which will be very useful for repairs. The technical content of machines of different brands is about the same, and if you have already come across the replacement of spare parts for a washing machine, then it will be easier for you to cope with the next repair.

Now you can start a story about certain types of breakdowns and how to repair them.

The most common cause is insufficient water pressure. Then the machine stops, and in order to start it again, it must be turned off and then turned on again. If there is a lot of laundry loaded, for the machine to start, just turn it off and remove the excess.

If there is a break in the power cord or initially poor contact in the power button, then the device periodically turns off by itself. The machine may also stop if it is not level and slightly skewed.

To solve this problem, first check the water pressure in the water supply system, and also make sure that the valve supplying water to the machine is open well.

You should be aware that the free end of the drain hose connected from below must be located at a height of more than 2/3 of the height of the device, otherwise water will immediately pour out of the machine.

There are many reasons for this problem. Sometimes it is enough just to clean the powder container well - due to its clogging, water can simply flow out of it.

If, after checking these hoses, you are convinced that everything is in order with them, then the reason lies in the O-ring.

It is necessary to check the tightness of the seals, both in the door and in the connection of the filling hose. If they are worn out, they should be replaced. Then you need to check the drain pump and hose for foreign objects stuck there.

Therefore, the wash water is not heated. This is due to the failure of the heating element, but do not rush to change it - this may also be damage to the electrical wiring.

Therefore, you should carefully check the entire electrical circuit, as well as the contacts of the heating element itself, using a multimeter. If the tester shows the presence of voltage in the entire circuit, then this means that the heating element will still have to be replaced.

The place where the heater is installed should be thoroughly cleaned, only after that it will be possible to mount a new heating element.

The most common cause of noise is incorrect machine installation. Because of this, the unit produces a strong hum during spinning. For this, the position of the machine must be leveled using a spirit level.

But sometimes excessive noise can occur due to heavy wear on the bearings. It is impossible to fix them - only to change them. For an inexperienced repairman, this is a rather difficult task, because it may be necessary to saw and then glue the non-separable tank, behind which the bearing is located. Therefore, if you are not sure of your skill, then do not take up this business, it is better to call a qualified specialist.

But if the tank of your car can be disassembled, then this task can be within your power. To do this, you need to remove the tank, then disassemble it by unscrewing the bolts and disconnecting the fastening latches.

After the defective bearing has already been removed, you should thoroughly clean the shaft, check if it is worn out, and then just install a new bearing.

Finally, we present a short list of error codes that are most often issued by the unit.

E1 - system error when filling with water. Means that the required water level during filling is not reached within 20 minutes. Eliminated by turning off and then turning on the machine.

E2 - error when draining. Most often occurs when the drain filter is clogged.

E3 - too much water. You do not need to do anything, the water is automatically drained within 2 minutes.

E4 - too many things. Their mass does not correspond to the parameters of the machine. You need to extract the excess.

E5 - water heating does not work.

E6 - malfunction of the heating element.

E7 - malfunction of the water level sensor in the tank.

E8 - water heating does not match the selected wash program. Most often due to problems with the heating element.

E9 - water leakage or drain, recorded more than 4 times.

DE, DOOR - bad blocking. Most often - a badly closed hatch door.

We bring to your attention a good video that you need to watch before you start replacing the bearing yourself.

The process of dismantling and replacing bearings:

What the disassembly process looks like:

Before starting an independent repair, you always need to correctly assess your own strength and not take on overwhelming work. But repairing a washing machine yourself is not very difficult, it is enough to understand a little about mechanics, electrical engineering, and also have the necessary tools and materials at hand. You will succeed!

Automatic washing machines Kandy are affordable and compact. Convenient control system and a wide range of programs have made the technique popular among users.

However, over time, even reliable equipment can fail.Is it possible to repair the Kandy washing machine with your own hands? Quite!

You just need to find out what the error codes on the control panel mean, and then find and fix the malfunction.

Let's analyze the main problems that are typical for machines of this brand. We will also find out how you can repair Candy washing machines with your own hands.

Have you noticed that the Kandy washing machine does not drain water. The program can stop right in the middle of a wash. Due to the fact that the water does not leave completely, you take out wet things after spinning.

What are the reasons for such a breakdown:

The drain system is clogged. If debris gets into the drain filter or hose, it will block. It is necessary to check the pump and the branch pipe from the tank to the pump.
Breakdown of the drain pump (pump). Often, small objects entering the pump cause damage to the pump.

Why isn't the Candy washing machine working? You start the washing machine as usual, but it does not respond to your actions. Let's figure out the reasons for this problem:

Defective mains cable or extension cord. He could burn out, twist.
Lack of voltage in the network, or it is not enough to start SM Kandy. This can happen if repair work is being carried out on your site, a powerful tool is involved, and so on.
The contacts on the start button are oxidized, so the machine does not respond to switching on.
Malfunction of the control module of the Kandy washing machine. The module is responsible for all programs in the CMA, therefore, if it breaks down, the technician refuses to work.

If you notice a puddle of water under the washing machine, you need to urgently look for a leak.

Attention! Do not step into the water, you may be electrocuted. If possible, disconnect the CM from the network or turn off the electricity supply on the switchboard.

Dispensing tray. If the tray is not periodically cleaned, powder accumulates in it, which clogs the pipe. As a result, leakage comes out of the tray.
Drain connection of the Candy washing machine. If it is damaged, water flows out through the bottom of the CM.
Rubber cuff of the hatch. With prolonged use, the cuff could leak and lose its tightness. Or it is damaged by small items during washing.

The washer does not start the washing process or washes things in cold water. The reason for this is a malfunction of the heating element (heating element). Basically, the element fails due to scale or damaged contacts.

Wear of bearings, oil seals, motor electric brushes leads to various malfunctions in the Kandy washing machine. For example, you may notice knocking and rumbling when the washer is running, or the drum stops rotating.

These include problems with closing the sunroof door, faulty wiring between parts and the control module, and a faulty Candy washing machine control board.

How to figure out what kind of breakdown happened in your car? The error codes will help you.

Thanks to the self-diagnosis system, a malfunction code is displayed on the Kandy washing machine display. After decrypting it, the user understands which detail needs to be checked. This makes it possible to independently repair Candy washing machines.

Depending on the type of model, CM can show an error in different ways:

Electronically controlled Activa models show an error on the display.
Models Candy Aquamatic (Kandy Akvamatik), signal about a malfunction by blinking the bottom light on the left. The number of flashes after a pause means the error code.

For washing machines Candy Holiday, Aquamatic, Activa and other models, the following error codes are characteristic: E01, E02, E03, E04, E05, E09.

It is not so difficult to repair a Kandy washing machine with your own hands. To do this, you need to know its common malfunctions and have some knowledge of electrical engineering. It is enough to watch the video on this topic (presented below) and a lot will become simple and clear.

In order to independently repair the washing machine, you need to carefully prepare for the repair. The tool, accessories and the workplace are prepared first. For disassembly you will need:

Screwdriver Set;
wrenches for 8, 10, 17 and 19;
pliers and side cutters;
pliers for self-clamping clamps;
awl and small hammer.

The best place to disassemble is the garage. The main thing is to have space and good lighting. At the workplace, you need to carefully lay out the tool, clean rags, sealant, WD-40 liquid, and a brush. It remains to prepare a soldering iron and an electrical measuring device, for example, a tester.

For those who will be doing repairs for the first time, it is advisable to have a camera for photographing the disassembly sequence. Pictures will be of great help when assembling the machine.

Before starting the repair of the washing machine, you need to find the malfunction due to which the appliance does not work. There are not many of them. The most time consuming of these is bearing replacement... It is immediately necessary to determine which tank is installed in the machine. If it is non-separable, it is better to postpone self-repair. Of course, you can rely on your experience, but it is better to entrust this work to specialists from the service. You will have to saw the tank to get to the bearings, and then you will need to glue it back together. It is much easier to carry out repairs on a typewriter with a collapsible tank.

To replace the bearing, the machine must be disassembled. For this purpose, the top and rear panels are removed first. The detergent dispenser is immediately removed along with the tray holder. Now nothing prevents the detachment of the front decorative panel. It remains to carefully pull out the tank. You need to be extremely careful here. The fact is that a mass of hoses, wires and other parts are attached to the tank. All of them must be carefully disconnected, secured, the loading hatch removed, and only then the tank must be removed. Moreover, it is almost impossible to perform this operation alone, you will need a second pair of hands.

To remove the bearings, we disassemble the tank, remove the pulley from the shaft, take out the shaft and carefully begin to remove the bearings (there are two of them in the car). The best thing to do is special puller... As a last resort, you can knock out with a hammer.

The next step is to install new bearings. As a rule, there are no difficulties here. We assemble the car in reverse order using photographs.

Important. Before installing new bearings, their seats must be well cleaned and lubricated with grease, for example, "Litol-24".

The next common problem is shock absorbers wear... This is a fairly simple operation. If the machine vibrates very strongly during washing or spinning, then it's time to replace the shock absorbers. They are located at the bottom of the tank. Considering their design feature - non-separability, it must be remembered that shock absorbers are not repaired, but replaced.

To remove them, you must first unscrew the lower mounting bolt (in the place where the shock absorber is attached to the machine body), and then the upper one. Instead of bolts, depending on the model, there may be plastic pins with latches. In this case, you must press the latch and push the pin out of its seat. For example, a screwdriver. After disconnecting the mountings, the shock absorber is removed and replaced with a new one.

Advice. When buying new shock absorbers, the seller must be sure to show a sample of the old one.

Sometimes, in order to fix Kandy's car, it is enough replace the heating element in it (heating element). It can be accessed with the rear cover of the machine removed. The removal process itself is not difficult. First of all, all wires are disconnected from the heating element. Then the fastening nut is loosened and the screw is pressed inward. After these operations, the heating element is carefully removed from its seat with a slotted screwdriver. When installing a new heating element, it is very important to avoid distortions and not to use brute force.Immediately after installation, without assembling the machine completely, it is necessary to check its operation by heating water to 60ᵒ. If this wash takes place without water leaking, you can assemble the machine to the end and put it in its place.

Important. When disassembling, try to remember the places of connection of the wires so that during assembly do not confuse them.

Complete disassembly of the Candy washing machine will be needed in case replacement of electric motor brushes... Repair in itself is not difficult, but without its implementation, the device will not work. The brush assembly of the electric motor is quite stable in operation. Without replacing it, the machine usually works for 5 years. There were cases when this period was more than doubled. It all depends on the intensity of the load on the machine. Replacing the brush assembly is very easy. The only problem is getting to the electric motor. When this is done, there will be no barriers to repair.

Repair of all washing machines, including Kandy, is not very difficult. Especially when you have knowledge in electrical engineering and plumbing. And, of course, the experience in repair work.

Washing machines from the Italian manufacturer Kandy have found their niche in the Russian market. These machines are distinguished by their small size and reasonable price. However, their quality is such that repair of Candy washing machines is carried out by masters much more often than Bosch or LG. What are the typical malfunctions, and is it possible to fix them with your own hands - this will be the further story.

Any washing machine can break down. The reasons may be different, banal or, on the contrary, too serious, which will lead to expensive equipment repairs. Professional diagnostics will help to determine exactly what is broken. But in most cases, such diagnostics can be carried out independently, the main thing is to listen well, take a closer look, and have tools at hand.

What goes wrong in Kandy typewriters most often? The wizards note the following malfunctions:

blockage of the drain system or its malfunction. If a blockage occurs, the machine does not drain the water and stops after the wash cycle, the laundry is not wrung out. If the tightness of the connection of the nozzles, hose or drain pump is broken, then water may leak during spinning. In addition, a characteristic hum during draining of water indicates a malfunction of the drain system, most often this is due to a blockage of the pump.
wear of the moving parts of the washing machine. Parts that are subjected to more stress during washing are subject to faster wear than those that do not. These elements include oil seals, bearings, shock absorbers, engine.

The average service life of bearings is about 7 years; they are replaced together with the replacement of the oil seals.

The malfunction of these parts manifests itself as follows: strong vibration of the machine during spinning, knocking or rattling of the drum even when the machine is not working, the drum stops, the machine does not start for washing after filling with water.

malfunction of the heating element. This breakdown often occurs with some Kandy washing machine models. It manifests itself in the fact that the machine either carries out the washing process in cold water, or does not start washing at all.

malfunction of electronics and electrics. Electrical wires and their connections with sensors can cause the machine to stop washing at some point. Most often, terminals are oxidized due to high humidity. But there are also wire burnouts due to high load. In case of power surges, the sensors and the control module of the machine may fail. This affects her work in different ways.Problems in draining and collecting water indicate a breakdown of the pressure switch, problems with spinning may indicate a tachometer.

A blockage in the drain system is a malfunction that can be easily eliminated by hand. In service centers, it belongs to the first category of complexity.A similar problem usually arises in cases where the rules for the operation and maintenance of the washing machine are not followed. Cleaning the drain system begins with cleaning the drain filter.

In Kandy machines, the drain filter is located at the bottom, on the left behind a small door or behind the bottom panel. To clean it, you need to carefully unscrew it counterclockwise and pull it towards you. Be sure to use a large cloth to prevent any remaining water in the tank from spilling out onto the floor. After removing the filter, rinse it in water and remove lint and other dirt, then slide it back into place.

To clean the hose, drain and pump, you need to lift the machine or lay it on its side. Before doing this, be sure to turn off the power supply, as well as the drain hose from the sewer. You can get to the pump in the Kandy machine through the bottom, which is either missing or there is a pallet. It can be easily unscrewed.

So, we loosen the clamps and disconnect the pipe and hose. We rinse the branch pipe in water and wipe it with a dry cloth. We clean the hose with a cable with a brush and inspect for damage. Next, we disconnect the sensors from the drain pump, unscrew the self-tapping screws holding the pump, and take it out. In the pump, you need to inspect the impeller, which is located under the cover.

Pile, hair, wool can be wound on it, so we clean everything carefully. Using a multimeter, we check its performance. If the pump burns out, then in this case it is better to replace it with a new one; repair in this case is not advisable.

After cleaning, we assemble the machine and run the wash in idle mode.

A malfunction in the moving parts of the washing machine is a major repair. Replacement of motor brushes, bearings, shock absorbers belongs to the third category of complexity. The difficulty in working with bearings lies in the fact that the sleeve on which they are fitted is thermally pressed, besides, the bearings themselves are not easy to get. But in general, the whole algorithm for replacing bearings in all machines is similar.

The silent operation of the washing machine is ensured by shock absorbers. And if one day you hear a roar, then, most likely, the problem is precisely in the shock absorbers, in rare cases in loose counterweights. It is not worth operating a machine with faulty shock absorbers, because this can lead to even more complex breakdowns. It is best to delegate their replacement to the master, but if you wish, if you have time and space to disassemble the machine, you can do this work yourself, step-by-step instructions that will allow you to do the work are in the article on replacing shock absorbers and dampers.

With prolonged use of the washing machine, the heating element breaks down. The reason may be hard water, which is deposited on the surface of the heating element in the form of a plaque.... In the event of a malfunction, an error code will appear on the display. The heating element is located behind the rear wall of the machine body under the tank. The algorithm for replacing the heating element is simple:

unscrew the back wall;
we unscrew the bolt holding the heating element;
we disconnect the sensors from the heating element, after taking a photo of their correct connection;
using a flat screwdriver, carefully pull out the heating element towards us;
we inspect it, if outwardly it is not possible to determine the serviceability, we take a multimeter and check its performance;
if the heating element is serviceable, then we clean it from scale, if not, we buy a new one;
insert the heating element into place;
we connect wires and sensors;
we fix the heating element with a bolt;
we put the back cover of the machine body.

Another of the typical breakdowns of a washing machine is an electrician, by which in this case we mean not only electrical wiring, but also sensors. The tachometer and pressure switch (water level sensor) fail more often. Checking that the wiring is working is a process that requires patience and skill in using a multimeter. In some cases, a visual inspection of the wires and terminals is enough to understand that they need to be stripped or replaced.

You can easily replace the water level sensor with your own hands. It is located under the top cover in the corner. It is necessary to disconnect the chips with the wires coming from the electronic board and the pump, and also disconnect the pipe coming from the tank. And in place of the faulty one, a new pressure switch is connected. It is better to entrust the replacement of the tachometer to a specialist, because you will have to disassemble the washing machine and get to the electric motor.

With poor protection against power surges and lack of grounding in the electrical network, the control module of the washing machine may fail. This can lead to the fact that the machine does not turn on, wash programs get lost, the machine "freezes". The control board is quite expensive, so it is best to entrust diagnostics and repairs to a master. In some cases, it is actually possible to repair, not replace.

There are amateurs who are easily versed in electronics, if you consider yourself one of those, then go for it. But remember, mistakes can be costly.

So, the repair of Candy washing machines should begin with a high-quality diagnosis, determination of the malfunction. Only after assessing the complexity of the work ahead and your capabilities, make a decision whether to do the repair yourself or it is better to entrust everything to the master. And there is nothing wrong with everyone doing their own thing.

SMA made in Italy are popular among Russian consumers for the convenience of the management system and a large number of programs. They are small, not very expensive, but break more often than LG or BOSH. If you have skills in the device of household appliances, then you can try to repair Candy washing machines yourself.

Breakdowns can range from simple to complex ones that can lead to costly repairs. To determine the reasons for the failure, it is necessary to diagnose, which is quite possible to carry out on your own. Experienced craftsmen put the following faults in the first place:

Blockage or technical malfunction in the drain system. The machine stops draining water, stops after washing, without going to spin. If the tightness is broken, then a leak may occur during the wringing of things. A signal to a problem that has arisen may be a characteristic noise during the descent of water. It is usually audible if the pump is clogged.
Wear of the moving parts of the washing machine. Oil seals, engine, shock-absorbing elements, bearings - all this is under constant load. If any of the elements fails, vibration appears in the machine, especially during the spinning process. If you listen, you can distinguish light tapping or grinding in the drum.
Failure of the water heating element. This problem is typical for older models. The water stops heating up, or the machine doesn't wash at all.
Problems with electrical and electronics. The wiring and the points of its connection to the sensors cause the washing machine to stop working. In most cases, due to high humidity, oxidation appears on the terminals, but sometimes the wiring "burns". Voltage drops cause the failure of the sensors and the control module. The failure of the pressure switch is accompanied by problems with draining and drawing water, poor spinning indicates that the tachometer has broken.

To fix the problem with your own hands, careful preparation is necessary. You will need a spacious work area, tools and accessories.

Eliminate blockage and drain problems.

This breakdown can be easily repaired on its own. The problem, as a rule, manifests itself in those situations when the rules for operating the machine and caring for it are violated. Cleaning the drain begins with checking the filter. In Kandy, it is located on the lower left side, hidden by a small door or panel. To clean it, carefully unscrew it counterclockwise, pull it towards you.First, spread a rag on the floor to collect the flowing water. The removed filter is washed with water, cleaned of debris, and installed in place.

To clean the hose, pipe and pump, you will have to raise the washer or lay it on its side. The power supply is disconnected beforehand, the drain hose is disconnected from the sewer system. You will have to get to the pump in cars of this brand through the bottom, which is either not there, or there is a special pallet.

After loosening the clamps, it is necessary to disconnect the hose and branch pipe. The latter is washed with water, wiped dry. The hose is cleaned with a cable with a brush and inspected for damage. After that, the sensors are disconnected from the pump intended for draining the water, the fasteners are unscrewed. Having taken out the pump, it is necessary to check the impeller located under the cover. As a rule, hair, wool, villi are wound around it, so everything will have to be removed. It is recommended to replace the burnt out pump with a new one.

Now all that remains is to assemble the machine and test it in operation.

Such work is considered more serious. The difficulty in replacing bearings is that the sleeve that holds them is thermally pressed in, and the bearings themselves are difficult to remove. For repairs, you will have to disassemble the washer by removing the top cover and back panel. First, remove the detergent tray. Next, the front panel is detached. Now it is the turn of the tank, which is removed carefully so as not to damage the wiring and hoses that were previously disconnected.

The peculiarity is that you cannot cope with such work yourself - you will need an assistant. To remove the bearings, the tank will have to be disassembled, the pulley removed from the shaft, the shaft removed, and the two bearings will have to be removed. For such work, you will need a special removable device, but you can also use a regular hammer. Now it remains to install new bearings and assemble the machine. It will not be superfluous if you pre-lubricate the cleaned seats with grease.

Another problem is shock absorbers wear. Strong vibration during washing or wringing out things will remind you of this. These elements are located under the tank. Remember that shock absorbers are non-separable structures, so they will have to be completely replaced. To do this, first unscrew the lower, and then the upper mounts. Sometimes there are plastic latches that you just need to press down to pull out the locking pin. The removed old shock absorber is replaced with a new one.

Procedure for replacing the heating element.

Most often, this element fails during prolonged use of the machine. The reason is the hardness of the water, which is deposited on the heating element with a dense bloom. In case of such a failure, a special error code will be displayed on the screen. There is no need to worry here - the work is simple, it is quite possible to do it yourself. It should only be remembered that the heating element is located behind the rear panel, under the tank.

To replace it, it is necessary to carry out a number of operations:

remove the panel;
unscrew the bolt securing the failed water heating element;
disable all sensors, having previously memorized or marked their connection;
using a flat screwdriver, you can begin to remove the heating element by gently pulling it towards you;
using a multimeter, it is checked for operability;

a serviceable element is simply cleaned of scale, and a new analogue is acquired instead of a burned-out one;
we carry out the installation, connect the wiring and sensors, screw in the mounting bolt, install the back panel in its place.

Problems with electrical and electronics.

Electrical failure is another common problem, involving not only electrical wiring, but sensors as well. Most often, the tachometer and the pressure switch, which is responsible for the liquid level, fail.Checking the wiring for operability is a rather complicated process, which implies the presence of a multimeter and the ability to use it. Sometimes a visual inspection is sufficient to identify oxidized wires or terminals.

The water level gauge is easy to change. It is located in the upper corner, under the cover. The wiring leading from the pump and the electrical board is disconnected from it, the tube connecting the device to the tank is disconnected.

In place of the removed pressure switch, a new one is installed. But the tachometer needs to be changed by an experienced craftsman, because the washing machine will have to be disassembled to get to the electric motor.

If the surge protection is not installed, or there is no ground, the control module may fail. The machine will stop turning on, programming will fail, the washing machine will freeze. The control board is quite expensive, so it is recommended to have it checked and repaired by an experienced technician. Most often, all work ends with its complete replacement.

It happens that the machine does not turn on during startup. There may be several reasons for this:

burned out or kinked network cable. It must be checked and, if necessary, replaced. It happens that the problem is hidden in the extension cord used, so it is recommended to start checking with it;
there is no voltage in the network. Also, it may simply not be enough to start the washing machine. To check, you will have to use any electrical device. If the "diagnosis" is confirmed, invite an electrician;
contacts on the start button have oxidized. Remove the top cover, remove the powder container, remove the panel, disconnect the wiring to the control module, inspect the contacts. They will either have to be protected or changed;
the management module has failed.

Noticing a puddle on the floor, it is recommended to urgently look for a leak. But before starting all the actions, the machine must be de-energized so as not to get an electric shock.

There may be several reasons for the leak:

the dispensing tray is clogged with detergents, clogging the branch pipe;
the water drain pipe is damaged;
from prolonged use, the cuff is worn out or damaged by small objects, having lost its tightness.

It is recommended to regularly clean the outside of the SMA Candy, without using products containing solvents, alcohols or abrasives. It is enough to use a damp cloth for such work.Check the detergent drawer regularly to remove any powder residues. If necessary, remove the container and rinse it thoroughly with water. Image - Kandy washing machine malfunction DIY repair samsung

The drainage system should be checked and cleaned twice a year.

If the device is moved to another place and it has not been used for a long time, all water must be drained from the system.

Remember that all repair work must begin with the diagnosis of the washing machine in order to identify the malfunction as accurately as possible. Having estimated the complexity of the failure and your own strength, you can decide on an independent repair or call an experienced specialist. Working on your own without the necessary skills can lead to more costly repairs. But if you act on your own, then change the failed elements with their exact counterparts.

Video (click to play).