Washing machine does not drain water DIY repair

In detail: the washing machine does not drain water; do it yourself repairs from a real master for the site my.housecope.com.

It often happens that you strictly adhere to all the rules for operating a washing machine for washing things, but at some point a failure occurs and it ceases to function normally.

Don't get upset right away if the washing machine doesn't drain the water. What are the reasons for this and how to carry out repairs with your own hands, we will tell you in this article.

A completely fixable situation is when the machine does not drain the contaminated water after the first wash. But how can you be sure that this is the problem?

Pay attention to the main signs that the device is not draining water:

The used water leaves slowly, which is why the work of the machine is completely disrupted and it cannot function further;
The device does not drain water only when it is programmed for certain modes;
The device works normally from the moment of starting, but water does not leave in the washing machine at that stage of washing when this should happen, therefore the machine does not wring out or rinse things, but stops and gives out a failure;
If the washing machine does not drain the water after the rinsing stage following the wash;
When the water does not leave at the final stage after twisting the laundry.

There can be many reasons why the washing machine does not drain. We will consider in detail how to identify and, if possible, eliminate them with our own hands. Why the washing machine does not drain the water, how to find ways to fix flaws and repair the machine.

Here are the most common:

When you are faced with the fact that the Samsung washing machine does not drain the water, but there is no apparent reason for this (the sleeve and filter are clean), try restarting the device.

Video (click to play).

After that, set the "Rinse Spin" mode on the control panel of the LG, Samsung, Indesit washing machine. It happens that indesite does not drain, and the lg washing machine does not drain the water and it becomes problematic to wash.

If everything continues to function without interruption, then the cause was fluctuations in the electrical voltage in the house. Otherwise, contact your machine repair technician for help.

As we already mentioned, the cause of "stagnation" can be a clogged internal channel that connects the drum and pump. This important detail is called a spigot.

But in order to make sure that the machine has stopped draining the liquid due to a clogged pipe, you need to see it, having previously disassembled the machine.

For this you need:

From the back of the machine, remove the holders that secure the drain structure;
Take out the part in the form of a small plastic curved tube and rinse it well;
Put the channel back in place.

If the device does not drain the dirty liquid, it is easy to check the hose for its removal with your own hands for clogging.:

Separate the element from the automatic machine;
Rinse it under strong pressure from the tap;
Put it back in place;
Restart the wash.

The washer may "refuse" to remove dirty water for another reason. Here the drainage system is clogged in the room where it stands. You can use special pipe chemicals to remove debris, or you can disassemble and clean them yourself.

If the "intermediary" between the machine and the sewer is a siphon, remove it and check for contamination.

Was the washing machine not draining and humming? Look deeper into the problem. Perhaps we are talking about a malfunction of the rotating element of the impeller pump.Failure can occur even if the slightest object hits this part.

To fix this problem, you need:

Open the filtration compartment and remove the filter - the impeller is located behind it;
Twist the element to make sure it works properly;
If nothing interferes with the movement of this part - the reason why the machine stopped in another;
If the element does not rotate, remove all visible debris around it. It can be not only coins or pebbles, but also threads wound around it.

The reason why the machine does not drain water and does not wring out may be the wiring inside the device. But it's not worth checking it yourself without special tools, knowledge and skills. Entrust it to a technician.

You can tell about this problem after checking the drain hose, sewerage system, filter element and impeller. If they are not clogged, there may be a problem with the wiring.

One of the most popular reasons why the washing machine does not drain water is trivial and easily fixable - it is a clogged filter compartment. Before ordering an expensive machine repair, check the filter.

You can do it yourself:

Substitute a small container for water;
Open the section with the filter (in the lower right corner of the device);
Turn the special screw inside this compartment counterclockwise;
Remove all debris and replace the element;
Check how well the Indesit, Veko, Ariston, etc. washing machine works after these manipulations. If the washing machine is Atlant, how to drain the water for it.

When your device does not squeeze and drain water, but you made sure that all the parts and wires that we have already talked about are not clogged or worn out. The pump may have broken.

Of course, it is better to entrust diagnostics and repairs to a certified specialist, but if you yourself want to fix the breakdown by replacing the main element in the washing machine, here are some tips on how to do it.:

First you need to get to the pump. To do this, disconnect the drain unit where the pump is located from the device;
Separate the pump from this assembly;
Disconnect the power supply wires carefully;
Install a new element and connect it to the wiring in the same order;
Fix the drain unit in its original location;
Plug the machine into a power outlet;
To make sure that the water is drained, carry out a test wash;
If all these actions did not solve the problem and the water does not drain out of the washing machine further, contact the service center, since you will hardly be able to diagnose the cause of the stagnation yourself.

Of course, the information on what to do if the washing machine does not drain the water is useful and by putting it into practice you can save time and money for repairs. But we bring to your attention even more useful recommendations.

These are tips on how to prevent the above problems. What to do if the washing machine does not drain water and often starts to hum.

There are not many of them, but they are key:

Do not overload the clipper in excess of the rate indicated on it. Each appliance has a maximum permissible weight of laundry. If you do not adhere to this rule, all parts in the machine are worn out and become unusable faster;
Be sure to remove everything, even the smallest, items from your pockets. Check whether buttons and decorative elements (beads, beads, rhinestones, etc.) hold well on the products. If possible, peel them off before washing;
To avoid damage due to fluctuations in electricity, install a special fuse before operating;
Check the filter compartment regularly for clogging. As we said, you can do it yourself;
Use your clipper correctly. The mode you select should be suitable for the type of fabric.

Do not forget to clean the machine from scale and dirt.This should be done at least once a year.:

Pour a special agent or citric acid into the powder receptacle (ordinary table vinegar is also suitable);
Set the mode on the typewriter, which provides for the highest temperature for cleaning (95 ° C);
Start an empty wash.
Clean regularly the pipes that make up your drainage system with a special cleaner.
To do this, pour the powder into the sink, toilet and bathroom drain and pour a glass of warm water there.
Wait 20-30 minutes, then flush the pipes with plenty of cold water.

The cycle is over, and the washing machine does not drain the water, or does not want to go to spin - an unpleasant situation. This may be a mistress's mistake when choosing a washing mode or a malfunction of the appliance. Diagnostics of the rebellious technique can be carried out independently without calling the master.

Persistent or intermittent problems with draining in the washing machine cycle indicate a malfunction. Using broken household appliances is not only undesirable - it is dangerous. The symptoms of a technical problem are as follows.

Too long wash - over and above the specified program.
The water is not drained at all, or the machine stops in the draining program after washing.
Periodic problems. Several washes go well, and then it fails.
The display indicates the end of washing and spinning, and the laundry is wet or the bottom of the drum is full of water. When washing without spinning, there may be too much water to open the machine.
The washing phase takes place precisely in time, and on rinsing the machine freezes, it can rinse for a very long time, the drum is idle for a long time.
The spin function does not work.

Problems can arise in isolated cases, combine or be present all the time - all this indicates unit breakdowns.

If you are dissatisfied with the work of household appliances, there are two ways out:

Call the master, leaving him to deal with the problem.
Diagnose and fix the breakdown yourself.

Each hostess will be able to partially diagnose the car. You will need it anyway. After all, a foreman who comes for repairs will ask what the problem is and how they found out about it.

Check the settings of the washing machine, the correct combination of the selected mode and options. If no spin mode is selected, the laundry will be wet after opening the drum. When washing bulky items made from hard materials, they can roll into a lump and not wring out to the end. When you select an additional rinse, the phase is greatly prolonged. In the "wool" mode, the drum is idle for a long time, and it may seem that the machine is frozen. The way to fix it is to change the settings, remember the correct ones and no longer get scared - the machine is working properly.
Check the network. The plug can be pulled out of the socket without the knowledge of the hostess. A power outage can cause the machine to stop. If the light blinked and the wash did not start again, the machine is full of water, does not drain, you need to press the "start" button again. Not all models have the ability to continue the operation after a short-term absence of light. Electricity can be disconnected from an overload of the circuit on which the outlet for the washing machine is located - you need to check the machines.

If there is food, the settings are correct (a small child can easily dig into them), which means that the malfunction is in the car, and not the owner.

The connecting pipe between the pump and the tank is clogged with debris or small change from the pockets and does not allow water to pass through well.
The pump has broken (or something is stuck in it). The unit hums a lot and water does not drain out of the washing machine.
The pump filter is clogged. This may be after washing very dirty things or an abundance of loose small parts in the bookmark.
The drain hose is pinched. If there is no direct discharge into the sewer, the hose is thrown into the bathroom manually, perhaps the "washing machine" was moved or something was put behind it. The hose can be pinched by a heavy object, and it is folded with kinks.It corrects instantly - you just need to straighten it.
The hose supplying water to the pump is clogged.
The siphon is clogged.
The sewer is clogged. With direct draining, this can affect the operation of the machine - there is nowhere for the water to go. They quickly stop washing and unclog the drain before additional water flows into the apartment.
Broken control module.
Overload. Washing machines are designed for a certain weight of laundry. If you put in a lot more, but tamp it well, she not only does not stretch clothes, but also faces problems with draining water. For normal operation, you will have to pull out some of the laundry, leaving it for the next bookmark.

The algorithm for diagnosing problems is simple - you should not immediately disassemble the machine and, sorting out the parts, try to understand why the washing machine does not drain the water. It is more convenient to check for possible malfunctions as the complexity increases.

If a malfunction is found at a certain stage, it should be eliminated and the unit's operability checked. It works - there is no point in continuing to disassemble the equipment. If the problem persists, go to the next item. The situation is quite real when one breakdown pulls another.

Some washing machines can diagnose themselves, display data on the display, you need to read the error code.

You can drain the water from the machine through the pump filter and drum. In both cases, if you do not substitute the container in advance, you can expect a mini-flood.

When draining through the drum, you need to firmly press the container against the front panel. Ideally, lay a dry cloth on the floor and use a square basin. After opening the door, water will flow over the front panel into the container. When the free flow stops, you need to remove the remaining water from the drum with a rag. It should be remembered that water remains in the system and may come out when disassembling and cleaning the drain mechanism.

Another option is to unscrew the pump filter and drain the water through it. Here you need a spacious container with low sides, because the filter door is low, and all the water will drain, forming a light pressure.

To eliminate light breakdowns and blockages of conductive parts, due to which the machine stopped draining water, you need to follow simple instructions.

Place a container with low sides under the drain filter door. It is usually found at the bottom of the front panel, in the corner below the drum. After opening the small door or removing the lower plastic panel, the filter handle becomes visible. This is the same "magic twist" that will help you find lost earrings, torn off buttons, change that disappeared from pockets during washing, and many other "treasures".

In front of the filter, all small objects that accidentally end up in the washing machine and get into the drain system accumulate. They interfere with the passage of water. To clean the filter, remove them and rinse the filter under running water.

The connection is located on the back of the washing machine. It is necessary to unscrew the screws on the drain unit, carefully loosen the clamp with which the branch pipe is attached to the snail, and remove it. Drain off water if it has accumulated inside. A blockage can form in the corrugation, which prevents the water from being drained. After removing the blockage, the parts are returned to their place. When cleaning the corrugation, you should not use sharp objects, they can arrange a leak and cause a breakdown of the machine later, a bottle brush or a strong pressure of water is quite suitable.

The pump filter is removed, the spin mode is started. Using a flashlight, you can see if there is a blockage on the impeller. If it is clean, but not spinning, then, most likely, the pump is broken, it's time to call the master or start replacing it.

It is checked simultaneously with the impeller. A clean impeller without blockages and the absence of characteristic sounds during the spin mode indicates a pump malfunction.

Replacing the pump requires removing the drain assembly, just like when checking the pipe, only you do not need to disconnect it from the volute.It is necessary to tilt the washing machine by the back wall, disconnect the "snail". Only after that the pump is disconnected from the power system and disconnected from the "snail".

The installation of a new pump is carried out upside-down. There is one caveat. The pump can only be faulty in a loaded machine. This happens when the mechanism has completely exhausted its resource. It regularly spins in an empty machine in the spin mode during testing and stops working when the system is filled with water. His efforts are simply not enough to pump the environment. In this case, the washing machine does not drain either; the pump needs to be replaced. This trouble can be determined only by excluding other possible causes.

Software modules are difficult to diagnose on their own, but some machines show an error code. Using the code on the Internet, you can find the essence of the breakdown without disassembling the unit and follow the instructions for elimination. Or call a wizard to replace parts or assemblies. Often the electronic unit is assembled, therefore it changes entirely.

If there is no automatic diagnostics, resetting the settings, restarting the machine with a complete power off or firmware of the module can help. It is better to entrust the latter to a professional, otherwise the “brains” of the “washing machine” will have to be changed or bought a new typewriter.

The drain mode may be affected by mechanical and electrical faults common to the system. Violations in the wiring provoke failures of various systems, malfunctions of the software module, pump, motor. They threaten with trouble not only the washing machine, but also the rest of the household appliances connected to the network, as well as the owners and their pets. The electric crackle, the smell of burnt insulation, a short circuit during the operation of the "washing machine" are most vividly signaled about a wiring malfunction.

Mechanical problems such as loose mounting bolts, leaks in hose connections can leak and increase from vibration during operation of the machine. In this case, it may not be necessary to drain the water for repairs; it will simply spill out onto the floor and flood the neighbors below.

Modern technology is quite reliable, and most of the troubles can be avoided by observing the operating rules.

In the case of a washing machine, these are:

Clean pockets before washing. Cleaning up small items, documents, etc. is a very useful habit. It will save not only the "washing machine", but also many necessary little things.
Observe weight criteria when loading.
Fill the unit with the correct detergent. That is, if there is no liquid or dry powder, postpone washing or wash by hand. Incorrect household chemicals in the tray can adversely affect the integrity of the entire system, for example, corrode some connections.
If voltage drops occur, connect the washing machine through a stabilizer.
Regular - once a year - cleaning the filter from debris and the entire system from scale. This is enough for the excellent performance of the technique.

Any technique loves cleaning, prophylaxis, maintenance, this seriously affects its service life and the quality of the operations performed.

In fact, there are three solutions to the problem of not having a drain, not two. In addition to calling the master and self-diagnostics, you can instruct someone from the family to conduct an inspection and repair work. Suddenly there are technology lovers among them who have long dreamed of getting to know the device of the washing machine.

The washing machine belongs to the type of equipment that is constantly in demand in every home, because regular washing of linen is necessary for every family. Despite the reliable design and rare failures, the washer sometimes breaks down. One of its most popular failures is the inability of the machine to automatically drain water. Let's try to figure out why the washing machine does not drain water and what to do in this situation for the owner of the machine to eliminate this malfunction.

If the washing machine does not drain the water, then the reasons for such a breakdown can be very different. Let's list them in the order of the probability of their occurrence:

Drain hose cloggedgoing from the car into the sewer. If a siphon is also included in this chain, then it can also get clogged with debris.
Clogged filter... Coins, pebbles, paper, buttons and other items that were not put out of pockets in time can block the filter.
The drain pipe is clogged with something, which is located between the tank of the washing machine and its pump.

Video (click to play).

Example of a debris clogged pipe

If the washing machine does not drain and hums, then it is probably the pump came out of standingresponsible for pumping water. It consists of an electric motor, a shaft with a plastic impeller and two pipes. The service life of the pump is about 5 years. Often, masters disassembling the pump find threads and hair wound on the impeller shaft, which were the reasons for the failure. In addition to engine burnout, the impeller may also break, but the entire unit changes, in this case, as a whole.

Electronic control module malfunction... Its failure can occur due to power surges or due to natural wear and tear of electronic components.

Drain hose too long... Over time, the capacity of the drain pump will gradually decrease. Usually this power is enough to drain water through a standard hose about 1.5 m long. If a longer hose is used, then the pump may not be physically able to pump water over such a distance. Typically, such a failure occurs if the old machine is moved to another place by lengthening the drain hose twice or more.

Drain hose of the automatic washing machine in a siphon

Many modern typewriters have digital displays on which not only operating modes are displayed, but also error codes that occur. For these codes, using a special table in the instructions, you can determine the nature of the malfunction for a more accurate diagnosis.

Some programs installed in washing machines may not provide for a spin mode, so the machine is waiting for an additional command, pausing during the washing process. Therefore, if the washing machine does not drain the water and does not wring it out, then you need to make sure that the required operating mode is set on the machine.

Important: If the washing machine draws water and immediately drains it, then the reasons may be a failed water level switch, an inoperative inlet valve, or a problem with the electronic module. In the latter case, you are unlikely to be able to fix the problem yourself.

If the automation refuses to drain the water, then you will have to perform this procedure yourself. Let's look at how to drain the washing machine. There are several ways to do this. Choose the one that is most convenient for you and drain all the liquid from the tank:

Unscrew the filter located on the bottom of the case, after placing a container for water under it. Tilt the machine towards the filter and fix it until the water drains out. The container should contain all the water in the tank.
If water does not flow through the filter, clean the pipe through which the liquid is drained. Sometimes it is enough to slightly wiggle the pipe so that water gushes out of it.
In case of other failures, drain the water with a hose, simply by lowering it into the tank of the washing machine, according to the law of communicating vessels.

Let's list the procedure for troubleshooting:1. Disconnect the washing machine from the mains.2. Cleaning the filter. On the front side of the machine, at the bottom, there is a hatch, under which a filter is hidden. It must be unscrewed and inspected. If it is clogged, it must be rinsed with water. If a filter is the cause of the problem, then water will flow from the pipe when you unscrew it. To prevent flooding, you need to prepare a basin for water. Image - Washing machine does not drain water DIY repair

Cleaning the washing machine filter

3.If the washing machine still does not drain the water - what to do? We check the drain pipe. To disassemble it, you need to unscrew the fastening screws of the drain unit. After that, the branch pipe is removed and checked. If it clogs up in some place, you can feel the blockage with your fingers. After checking, the branch pipe is installed in its original place.

Drain connection

4. Also, one of the reasons that the washing machine does not drain water may be a jammed impeller. It is located behind the filter. Often some small objects and threads fall into it. Check if it rotates freely. To do this, scroll through it. If the impeller does not rotate, then it is jammed, and it will have to be freed from objects that interfere with it. If it does not jam, then the pump itself is likely to fail.

5. To diagnose the pump, it is necessary to unscrew the filter and set the spin program in the washing mode selection menu. Use a flashlight to light the drain hole. If the impeller of the pump is in a stationary position, then you should suspect a breakdown of the pump. The defective pump must be replaced.

6. There are times when the pump impeller rotates on dry spin, but the water is not drained. Such a malfunction is more typical for old units, the components of which are already worn out. Inside the pump, in a plastic cup, there are permanent magnets. The glass is protected from water getting on the magnets by a cuff located on the shaft. When voltage is applied to the pump winding, the permanent magnets begin to rotate, driving the stem.

If the sealing collar is damaged, then water begins to seep into the glass, and with it, dirt. As a result, the magnets cannot fully work, and pump wedging is observed in the spin mode. In addition, over time, the magnets themselves can gradually demagnetize, which also leads to a decrease in pump power. A symptom of such a problem is the noise emitted by the pump. In this case, the pump itself does not work, but only makes noise.

Tip: If your machine is more than 6-7 years old, and it makes noise during spinning, the probability of pump failure is very high. It needs to be replaced.

One of the most difficult failures, in which the washing machine stopped squeezing and draining water, and also hums, is a pump malfunction. In this case, it will most likely need to be replaced.

Washing machine pump

Consider the procedure for replacing the pump:

It is necessary to remove the drain assembly.
The drain pump is detached from the drain unit.
The wires suitable for it are removed from the pump.
A new unit is installed in place of the old pump.
Wires are connected to the new pump.
The drain assembly is installed in its place.
The machine is connected to the mains and a test wash is performed.
If the washing machine continues to drain poorly, contact the service department.

In order for the washing machine to serve reliably for many years, we advise you to adhere to some simple recommendations:Using these simple tips, you will be able to use your washing machine for its intended purpose for many years.

One of the reasons why the machine does not drain water is a blockage in the system.

A fairly common problem: the washing machine stopped draining water, there may be several reasons for such a breakdown, we will consider all possible options.

You should know this! In modern machines with electronic control, in case of a malfunction, an error code is displayed on the display, according to this code, you can easily determine the cause of the breakdown and the possibility of self-elimination.

If the machine does not spin or drain the water, check the wash program. If the reason lies not in the incorrectly selected mode, you need to disconnect the unit from the power supply and proceed to the next algorithm of actions.

What to do if the washer stops draining water in the middle of the cycle, and in time it must finish rinsing the laundry? Hence, the failure has occurred in the electronics. In modern models, the malfunction can be determined by the error code that is displayed on the display. Another possible reason: voltage drops in the network. Debugg:

you first need to restart the machine: unplug the plug from the outlet, wait a few seconds and turn it on again;
if the restart did not help, you need to re-enable the rinse and spin mode.

If this did not bring the desired effect, then the cause of the breakdown is not a malfunction of the electronic module. When the washer collects water and immediately drains it, this may be caused by a failure of the water level control sensor. It is located under the top panel at the top of the side wall. You can invite a specialist to eliminate this malfunction or unscrew the top cover yourself and replace the pressure switch.

It is important! If the washer does not drain the water, and the reason lies in the breakdown of the pressure switch, manufacturers categorically prohibit repairing it on their own, this will lead to overloads that were not taken into account during the design of the washing machines.

If the reason why the automatic machine does not drain the water is in the filter blockage, any housewife can perform cleaning. At the bottom of the front side of the model there is a small cover, behind which there is a filter. Before starting the process, the water from the drum of the washer must be drained, otherwise, when we open the pipe, all the liquid will pour through it, and this will be fraught with negative consequences for the neighbors. Further, the sequence of actions is as follows:

Open the front cover.
Turn by the handle and remove the filter.
Drain the remaining liquid into a small container.
Examine it for clogging, then rinse under running water.
Reinstall the filter.

To understand clearly how to clean the filter, the following video will help:

After inspecting the filter, you can start checking the operation of the drain system. To do this, disconnect the hose, place it over the bathtub or toilet and start the flushing program. If the liquid passes, then a blockage has arisen in the siphon. To clean it, it must be removed, cleaned, rinsed with running water and reinstalled.

It is important! It is imperative that after the steps taken, turn on the machine for a regular wash, but without laundry. Thanks to idle operation, the quality of the cleaning of the elements can be assessed.

Related article:

How to clean a washing machine with citric acid. Reviews of the procedure and precautions, the advantages and disadvantages of this cleaning method, folk ways to get rid of scale - read the publication.

The impeller is one of the common reasons the machine stops draining water. Small objects, hair or threads can fall into it. It is necessary to check whether it can rotate freely, for this you just need to scroll it. If the movements are difficult or cannot be performed at all, then the problem has been found. To eliminate it, you need to free the node from all unnecessary objects wrapped around it. If the rotation occurs freely, the cause of the breakdown is probably a pump malfunction.

Another of the situations why the water from the machine stopped draining is possible violations of the integrity of the electrical wiring. This can happen for several reasons:

overheating of elements due to overload;
short circuit;
faulty wires.

Damage to the impeller with coins

What to do if the machine does not drain the water due to a pump malfunction, this can be determined by the characteristic hum. Unfortunately, in this case it is necessary to replace it.

The algorithm of actions is as follows:

Dismantle the drain assembly and remove all wiring from it.
Install a new pump in its place.
Connect all wiring to the pump unit.
Carry out a wash in a test mode.

Unfortunately, there are times when, even after replacing the unit, the drain is still poorly performed, only contacting the service department will help to eliminate the malfunction.

New pump for washing machine

Sometimes the cause of the malfunction in the case of poor drainage of the liquid lies on the surface. Let's consider the most common options.

It is important! Washing machines are equipped with a special plastic hinge. It should be fixed to the back of the equipment and a hose should be passed through it.

Checking flexible connections

All tips for eliminating the causes of breakdowns of washing machines are universal and suitable for any brand. But the models of some manufacturers have their own weaknesses, in this regard, the most frequent malfunctions can be distinguished.

The weak link why LG washing machines stop draining water is the mechanical parts. It can be noted that the failure of electronics is much less common, this should be taken into account during equipment diagnostics. Therefore, after you have drained the water from the LG washing machine, you first need to look for a blockage in the filter, impeller, or check the pump's serviceability using the above methods.

The quality of Bosch models has been tested for decades, however, there are malfunctions in this technique. The main reason why a Bosch washing machine does not drain water is a pump breakdown, which is not cheap to replace. First, you should perform the simplest measures to detect the blockage, only then proceed to the installation of a new unit.

Unfortunately, modern washing machines from the manufacturer Indesit are not of good quality, the reason why they do not drain water may be the failure of the electronic control. In addition, the weak point of the washers is the pump. To diagnose serious breakdowns, it is better to contact a service workshop.

Washing machine Indesit

The quality of Samsung washing machines has also dropped recently, the main reason why they do not drain water is the failure of spare parts. To reduce the cost of assembly in production, they often use cheap elements, which are the subject of breakdowns. If the machine stops draining water, you need to check all the components to determine the source of the blockage, and only after that contact the professionals. Perhaps the reason lies in the electronic control.

Washing machine Samsung

The reasons why Ariston washing machines do not drain are similar to the Indesit models. This is primarily electronic control and a pump. Unfortunately, the quality of this technique has recently been poor.

Washing machine Ariston

If the machine has stopped removing water from the drum, it must be emptied by yourself before any repairs, especially if there is laundry in it. This can be done in several ways, we will consider a step-by-step algorithm of the simplest actions.